Plastic and Reconstructive Surgery | Biopore™ | Fixation screws
Español | English
Link to e-shop

Enlace a tienda virtual
Get discounts
by buying online

Contact
Plastic and Reconstructive Surgery
Microscrews for Biopore fixation


Microscrews for
BIOPORE™ implants fixation
self-drilling self-tapping
drill-free

no predrill necessary!
Titanium alloy, for fixing and stabilizing the implants.

Easy and smooth insertion with its self-drilling tip, no need of predrilling.
It simultaneously offers an excellent fixation.

Available in diferent diameters:
1.4mm, 1.6mm, 2.0mm in several legths.

Select the best option for your needs


Fixation with screws drill-free diameter 1.4mm
drill-free screws
Article code
Description
Microscrews
diameter 1.4mm
drill-free
14-AT-004
1.4 mm x 4 mm (diameter x length)
14-AT-006
1.4 mm x 6 mm
14-AT-008
1.4 mm x 8 mm
14-AT-010
1.4 mm x 10 mm
14-AT-012
1.4 mm x 12 mm
Emergency screws
15-MC-006
1.5 mm x 6 mm
15-MC-008
1.5 mm x 8 mm

Option: "no drill free" screws diameter 1.2mm (use same instruments)
no drill-free screws
Article code
Description
Microscrews
diameter 1.2mm
no drill-free
12-MC-004
1.2 mm x 4 mm (diameter x length)
12-MC-006
1.2 mm x 6 mm
12-MC-008
1.2 mm x 8 mm
12-MC-010
1.2 mm x 10 mm
12-MC-012
1.2 mm x 12 mm
Emergency screws
15-MC-006
1.5 mm x 6 mm
15-MC-008
1.5 mm x 8 mm

Instruments for screws diameter 1.4mm and 1.2mm
Item
Article code
Driver
For
screwdriver
handle
113-MC-101
For
counter-angle
113-MC-202
Pilot twistdrill
112-MC-201
Screwdriver handle
111-010
Sterilization
organizing block
for instruments
and microscrews 		112-080



Fixation with screws diameter 1.6mm
drill-free screws
Article code
Description
Microscrews
diameter 1.6mm
drill-free
16-AT-004
1.6 mm x 4 mm (diameter x length)
16-AT-006
1.6 mm x 6 mm
16-AT-008
1.6 mm x 8 mm
16-AT-010
1.6 mm x 10 mm
16-AT-012
1.6 mm x 12 mm
Emergency screws
19-MD-004
1.9 mm x 4 mm
19-MD-006
1.9 mm x 6 mm

Option: "no drill free" screws diameter 1.6mm (use same instruments)
no drill-free screws
Article code
Description
Microscrews
diameter 1.6mm
no drill-free
16-MD-004
1.6 mm x 4 mm (diameter x length)
16-MD-006
1.6 mm x 6 mm
16-MD-008
1.6 mm x 8 mm
16-MD-010
1.6 mm x 10 mm
16-MD-012
1.6 mm x 12 mm
Emergency screws
19-MD-004
1.9 mm x 4 mm
19-MD-006
1.9 mm x 6 mm

Instruments for screws diameter 1.6mm
Item
Article code
Driver
For
screwdriver
handle
113-MD-101
For
counter-angle
113-MD-201
Pilot twistdrill
112-MD-201
Screwdriver handle
111-010
Sterilization
organizing block
for instruments
and microscrews 		112-080



Fixation with screws diameter 2.0mm
drill-free screws
Article code
Description
Microscrews
diameter 2.0mm
drill-free
20-AT-004
2.0 mm x 4 mm (diameter x length)
20-AT-006
2.0 mm x 6 mm
20-AT-008
2.0 mm x 8 mm
20-AT-010
2.0 mm x 10 mm
20-AT-012
2.0 mm x 12 mm
Emergency screws
23-MN-006
2.3 mm x 6 mm
23-MN-008
2.3 mm x 8 mm

Option: "no drill free" screws diameter 2.0mm (use same instruments)
no drill-free screws
Article code
Description
Miniscrews
diameter 2.0mm
(self tapping
but no drill-free)
20-MN-004
2.0 mm x 4 mm (diameter x length)
20-MN-006
2.0 mm x 6 mm
20-MN-008
2.0 mm x 8 mm
20-MN-010
2.0 mm x 10 mm
20-MN-012
2.0 mm x 12 mm
20-MN-014
2.0 mm x 14 mm
20-MN-016
2.0 mm x 16 mm
20-MN-018
2.0 mm x 18 mm
20-MN-020
2.0 mm x 20 mm
Emergency screws
23-MN-006
2.3 mm x 6 mm
23-MN-008
2.3 mm x 8 mm

Instruments for screws diameter 2.0mm
Item
Article code
Driver
For
screwdriver
handle
113-MN-101
For
counter-angle
113-MN-201
Pilot twistdrill
112-MN-202
Screwdriver handle
111-010
Sterilization
organizing block
for instruments
and microscrews 		112-080



Assembly instructions of the drivers to the screwdriver handle
 
1. Hold the grip of the hand body and pull the bushing   2. While pulling the bushing insert the driver
 
3. Push the driver until it stops, then release the bushing   4. Turn the driver until it's stuck as holding the revolving part to check if driver is firmly fixed
Assembly instructions of the drivers to the counterangle
  After inserting the driver in a handpiece, make sure that it securely in place by pulling it out.
Check if it turns left and right.
 

Picking-up the screw
 

1. Select the adequate driver for the screw selected.
2. Pick up the screw with driver perpendicular to surface of block container.

  3. Check the length of a screw by using the gauge in the block.
Drilling (optional)
 
Since the screws are drill-free (self-drilling), the drilling process is not necessary in general. Drilling could be needed when inserting screws of small diameter in dense bone. The drilling speed should be maximum 1000RPM with continuous irrigation with saline.


Products Certified CE0120
 

Seminars & Congress | Catalogs | Literature | Clinical cases | Instruments handling
C/ Albacete, 1, 7ª - 46007 VALENCIA - España - info@recursosmedicos.com
T: +34 / 963 420 478 - F: +34 / 963 808 194