Ophthalmology | Honan Intraocular pressure reducer
Español | English
Link to e-shop

Enlace a tienda virtual
Get discounts
by buying online

Contact
Ophthalmology
Honan Balloon: Intraocular Pressure Reducer
The best way to lower intraocular
pressure before surgery


With a soft eye, the iris may be concave or drop posteriorly after lens removal.
Excess vitreous pressure is typically absent. Intraocular lens implantation is much easier and safer.

From the surgeon’s viewpoint,
there is much less stress and strain.

Pressure on the eye traditionally has been a method of slowing some tachycardias.
Some persons may be more sensitive to the ocular-vagal reflex. Therefore, all patients
should be monitored for signs of bradycardia while pressure is being applied to the eye.

With a soft eye, the iris may be concave or drop posteriorly after lens removal.
Excess vitreous pressure is typically absent.
Intraocular lens implantation is much easier and safer.

From the surgeon’s viewpoint, there is much less stress and strain.




MATERIAL VERIFICATION OF COMPONENTS:
The black reusable Bellows (#150), the reusable Headband (#210, #200), the Tubing (#300), Gauge bulb air pump (#500, 550) are made of latex.

The Disposable Bellows & Headbands (part series #700's), contain:  
The Bellows (the blue inflatable cushion) is 100% Polyvinyl Chloride (PVC), which contains no trace of latex. The Silicone Tubing (#625) is FDA CFR21 177.2600 compliant.  The white Tyvek® Headband (from DuPont) is polyethylene.
The device is classified as a Class I
unsterilised medical device and a notified
body is not involved in its certification.  
Therefore there is no certificate from a
notified body.  
Caution: This Product Contains
Natural Rubber Latex Which May
Cause Allergic Reactions
PRESSURE RELIEF VALVE
A highly sensitive precision finished relief valve will limit to approximately 60 mm Hg, the pressure that can be applied to the Honan Intraocular Pressure Reducer. It is permanently adjusted and is designed to prevent pressure in the bellows from exceeding approximately 60 mm Hg, even if the gauge should become damaged by rough handling, dropping, etcetera. It will hold 20 - 40 mm Hg pressure as desired for as long as the Surgeon deems necessary.

It is easily added to any Pressure Reducer now in service.


 

Seminars & Congress | Catalogs | Literature | Clinical cases | Instructions | Configuration | Using the balloon
C/ Albacete, 1, 7ª - 46007 VALENCIA - España - info@recursosmedicos.com
T: +34 / 963 420 478 - F: +34 / 963 808 194